P.ALUZIR11M.RA-10

Pack of 10 burs

Polishing zirconia or ceramic after occlusal adjustment was always a big concern for us until we found these burs.

The Frank Dental zirconia polishers produce a consistently excellent finish on zirconia principally (for which they are designed) but we have also had outstanding results when polishing lithium disilicate and feldspathic porcelain so we recommend them for all porcelain polishing.

The polishing compounds are designed for laboratory use also laboratory use also and both high quality and hard wearing.

These burs come in a 3-grade polishing system from coarse (green), to medium (red) to fine (yellow). For best results dentist should follow this recommended polishing sequence.

The polisher are available from us in 3 patterns (point, cup and disc) to allow efficient polishing of all polishing surfaces.

Take careful note of the maximum speed for these burs which should also be cool to avoid damaging the zirconia.
The manufacturer the polishers are applied with air/water coolant at high volume (min 50ml/min).

Max speed 20,000 RPM